Sash Lock Door Handles
If you want to enhance the security of your home without compromising aesthetics choose doors with sash locks. They can be used in conjunction with a mortice lock or sash lock, and can be combined with an nigh latch to provide additional security for your door.
These handles consist of a handle/lever on backplates and are typically used with a three or five lever mortice lock. They can be paired with a tube latch.
Lever Lock Handles
There are many different types of lever door handles available to match the decor of your home. The rustic lever locks are a favorite in both farmhouse-style and modern homes. Classic lever handles are circular or spherical, and are easy to hold. They are easy to use, inexpensive, and suitable for any type of home design. Choose polished or satin nickel chrome handles for a classy style. These finishes are easy to clean and durable. Other options include antique bronze and polished brass. A lot of handles feature a decorative design, such as small amber worm eyes, or long-horned crystals. Some levers feature a star, pin or some other shape that is molded into the bottom.
To replace the lever lock door handles, you require the appropriate screwdriver, or a tool to disassemble the handles. Depending on the model and design you may have to use an awl or nail to remove the lever handle. Some lever handles feature a small notch or hole at the base of the handle that can be used to pry them open.
Once you have the right tool Follow the instructions of the manufacturer to remove your existing handles. Examine the spindle of your new lever. Doors that are in use may have been morticed for locks and latches in the past, that require a particular spindle. Most lever handle manufacturers have an established door spindle size for handle.
If you are replacing a sash lock door handle the handle that was previously used must be removed and the tubular latch bolt which sits inside the door, must be disconnected from the strike plate inside the door frame. The next step is to drill a hole into the door frame, then insert the latch bolt into it, and connect it to the strike plate within the door frame.
When installing a new lever door handle it is crucial to remember that all ADA (Americans with Disabilities Act) compatible handles are designed to be operated by hand and should not require users to grip tightly or twist their wrists. To ensure that they be in compliance with ADA standards for compliance, the lever door handle can't be operated using only the thumb and finger or the entire hand.
Sash Lock Handles
The main function of door handles with sash locks is to pull the sashes moving together in a tight seal. This helps to maintain the temperature inside the house and stops drafts. They are also ideal for doors that don't need the security of the keyed locking system.
Sash locks are sometimes called mortice sashlocks. They incorporate the latch and dead bolt into a case that is fitted into the material of a door. They can be used with door handles and come in a variety of options.
Lever lock handle is a lever on the backplate, which is cut off below it, which allows the use of a key to open the mortice sash lock. This lock is typically used on doors that do not lock, such as those in dining and living rooms. However, it can also be used with a tubular lock for the security of the door.
These are designed to keep the sash in place at several points, and include a hook that fits inside the keeper. They are available in a variety of styles and designs to fit into various window types like sliding or hinged casement windows. Some are made of cast aluminium while others are brass or wrought iron. These are available in different finishes to match the other elements of the door furniture like escutcheons to protect the keyhole.
The 3 lever sash locks are suitable for doors that are internal. They do not provide the security required by insurance companies. They also have lower resistance to forced entry, which makes them more vulnerable than their certificated 5 lever counterparts.
A door sash lock that has 5 levers is a much more secure option for exterior doors because it offers higher levels of protection against forced entry and is much more difficult to bypass or pick. www.repairmywindowsanddoors.co.uk are a brand new design that has been tested and approved to meet the strict building regulations for fire, disability and security.
To replace a handle on a sash-lock remove the old fastener from both ends by taking off the screws. Make sure you have a screwdriver in your bag and carefully separating the pieces to avoid damage. Use a pencil to mark the location of the screw holes to ensure that you place the new fastener properly when you are putting it on. Clean up any dust or flickers of paint and then screw the new fastener in. It is essential to test the handle to ensure it operates correctly and creates a tight seal.
Tubular Latch Handles
The tubular latch is an internal latch that can be operated by turning the handle. It is designed to shut the door however it does not lock the door as a mortice lock would. They are usually used on internal doors where no locking is required. They can be equipped with lever or knob handles.
Tubular latches are available in different sizes. They range from the cheapest to top-of-the-line architectural quality. The size of the door is contingent on its purpose and whether it is equipped with a lock. If you require an emergency release mechanism that can be triggered by thumbs an emergency, then you need a lockable latch.
The backset of your door will also influence the latch you choose. This is the distance between the edge of your door and the center of the hole for the door handle rose/knob and you must choose a latch with an identical backset measurement. This will ensure that your knobs and handles can operate the latch without a hitch.
If you are installing a knob or lever that has a spring or not spring, it is crucial to select an extremely robust tubular latch. It must have a double-sprung follower. This will ensure a smooth latch action and will prevent it from becoming sluggish or unresponsive after prolonged use.
Once you've selected the right latch for your requirements the next step is to install it onto the door. First, ensure that the latch is in line with the top of the door frame or casing by making a mark on the location of the latch plate then drilling holes for it. Utilizing a countersink drill will aid in creating the correct recess for it to rest comfortably in.
Once the latch is installed, you can install it into the door. It is crucial to ensure that it is functioning properly prior to fitting the door handles and installing your locks, so make sure to test it by opening and closing the door repeatedly. If it's not functioning properly, try lubricating the door with WD40. Then, try it again. If you are still experiencing issues, it could be necessary to consult a locksmith or a professional installer.
Keyhole Handles
The keyhole handles are used with a tubular latch installed in the door. The latch is used to open and close the door. The handle engages the latch when pushed down and then releases it when pulled up. These types of handles are most often used on internal doors such as living rooms and doors to dining rooms but can also be fitted to front doors if combined with the nightlatch.
Door knobs are a more contemporary type of handle that incorporates a sprung lever/handle on a round or square fixing rose, with a matching thumb turn or escutcheon. They come in a variety of designs and finishes that will fit the doors of your home. They are able to be used with Euro cylinders or multipoint locking systems to provide added security. This is accomplished through a variety of points of locking along the door's height and requires compatible door handles with the correct lock centre dimension to fit the barrel of the cylinder.
Keyhole escutcheons are an enclosure for the door's keyhole that hides it from view and create a more stylish look to the handle. They are available as a pop-on or screw-on design and are available in a variety of finishes to match your door handle. Alternatively, a concealed escutcheon is able to be attached to the door's edge to further hide the keyhole and provide a more modern look.
Some of the handles are compatible with Euro-cylinder locks. These are used to secure uPVC doors and require compatible handles with the Euro cylinder hole as well as screw holes in the backplate. These handles might also require a Euro-cylinder escutcheon, or a standard escutcheon, depending on the application.
Whether you choose a mortice lock, sash lock or tubular latch for your door, you need to know the distinct features of each and the requirements they have to work with other components of your uPVC door system. You'll need to take into account the thickness of the door and the door hinges as well as the frame reinforcements. the size of the backplate to the handle, the lock centre dimensions, and the screw centres on the cylinder.